Unique Work Surfaces - Zodiaq

Cut Outs.

Cut-Outs for sinks and hobs are also available, at extra cost.

Hob cut-outs in particular must always be factory fabricated, as they must be set on an MDF sub-frame,which is set back, each corner strengthened and reflective insulation tape applied to all edges.

Hob/ Sink Cut-out	Belfast Sink Cut-out
Pan Rests consist of 10mm bars placed in 5mm deep grooves in the worksurface. The bars are available in stainless steel or brass, in lengths of 200, 300 and 400mm lengths. These are available as an extra over price quoted for six pan rests, but the customer can request more or less as required.
Stainless Steel Pan Rests